Grand Cherokee 2WD V6-3.7L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Hoses - Installation
Pressure Hose - Gear To Pump
PRESSURE HOSE - GEAR TO PUMP
1. Install the line (2) to the vehicle.
2. Install the three mounting brackets (6) for the pressure line (2) to the engine cradle.
3. Reconnect the power steering pressure line (2) to the power steering gear (7) Tighten to 28 Nm (21 ft.lbs.).
4. Reconnect the power steering pressure line (2) to the power steering pump (1) Tighten to 28 Nm (21 ft.lbs.).
5. Refill the power steering fluid and bleed the system See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and
Repair.
Return Hose - Pump To Cooler
RETURN HOSE - PUMP TO COOLER
1. Install the line (5) to the vehicle.
2. Reconnect the power steering return hose (5) to the power steering cooler (4).
3. Reconnect the power steering return hose (5) to the power steering pump (1) Tighten to 28 Nm (21 ft.lbs.).
4. Refill the power steering fluid and bleed the system See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and
Repair.
Return Hose - Gear To Cooler
RETURN HOSE - GEAR TO COOLER