Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Maintenance > Wheels and Tires > Wheel Fastener > Component Information > Service and Repair > Studs - Removal

Page 1
background image

Wheel Fastener: Service and Repair
Studs - Removal

Front Wheel Stud

FRONT WHEEL STUD

CAUTION: Do not use a hammer to remove wheel studs.

1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper, caliper adapter and rotor,See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and

Repair/Removal and Replacement/Brake Rotor - Removal.

4. Remove stud (2) from hub with Remover C-4150-A (1).

Rear Wheel Stud

REAR WHEEL STUD

CAUTION: Do not use a hammer to remove wheel studs.

1. Raise and support vehicle.
2. Remove wheel and tire assembly.

3. Remove brake caliper and rotor,See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and

Replacement/Brake Rotor - Removal.

4. Remove stud (2) from hub with Remover 8677 (1).

Maintenance > Wheels and Tires > Wheel Fastener > Component Information > Service and Repair > Studs - Removal

[PREV PAGE] [NEXT PAGE]