Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Service and Repair > Engine Control Module (ECM) > Page 4012

Page 2
background image

1. Install Engine Control Module (ECM) (1) into the bracket (3).
2. Position ECM into bracket and align bolt holes.
3. Tight two hold down bolts (2)

4. Connect two ECM electrical connectors (2).
5. Install the battery tray. See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Tray - Installation
6. Install the battery. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery - Installation

NOTE: The new ECM must be programmed. See: Testing and Inspection/Engine Control Module (ECM)

Powertrain Management > Computers and Control Systems > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Service and Repair > Engine Control Module (ECM) > Page 4012

[PREV PAGE] [NEXT PAGE]