Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Ignition System > Ignition Shut Down Relay (For Antitheft) > Component Information > Service and Repair > Removal

Page 1
background image

Ignition Shut Down Relay (For Antitheft): Service and Repair
Removal

REMOVAL

The ASD relay is located in the engine compartment within the Power Distribution Center (PDC). Refer to label on PDC cover for relay location.

1. Remove PDC cover.
2. Remove relay from PDC.
3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Ignition System > Ignition Shut Down Relay (For Antitheft) > Component Information > Service and Repair > Removal

[PREV PAGE] [NEXT PAGE]