Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair > Removal > Page 3445

Page 1
background image

Ignition Switch Lock Cylinder: Service and Repair
Installation

INSTALLATION

1. Install ignition key into lock cylinder (1). Rotate key to "ON" position (retaining tab on side of lock cylinder (3) can now be depressed).
2. The shaft at end of key lock cylinder aligns with socket within end of housing. To align socket with lock cylinder, ensure socket is in "ON"

position.

3. Position and align key lock cylinder with grooves in housing.

4. Slide lock cylinder into housing until release tab (3) sticks through opening at side of housing.

5. Install bezel (1). Snaps on.

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair > Removal > Page 3445

[PREV PAGE] [NEXT PAGE]