Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Powertrain Management > Tune-up and Engine Performance Checks > Air Cleaner Housing > Air Filter Element > Component Information > Service and Repair > Removal > Page 3487

Page 1
background image

Air Filter Element: Service and Repair
Installation

INSTALLATION

1. Install filter element into housing (1).
2. Position housing cover into housing locating tabs.
3. Pry up 4 spring clips and lock cover to housing.
4. Install air duct to air cleaner cover and tighten hose clamp to 3 Nm (30 in. lbs.) torque.
5. If any other hose clamps were removed from air intake system, tighten them to 3 Nm (30 in. lbs.) torque.
6. If any bolts were removed from air resonator housing or air intake tubing, tighten them to 4 Nm (40 in. lbs.) torque.

Powertrain Management > Tune-up and Engine Performance Checks > Air Cleaner Housing > Air Filter Element > Component Information > Service and Repair > Removal > Page 3487

[PREV PAGE] [NEXT PAGE]