jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Air Bag Systems > < Repairs and Inspections Required After a Collision|Service and Repair|Page 8438
Page 3
background image

your way inside, so that you avoid kneeling or sitting on a non-cleaned area.

2. Be certain to vacuum the heater and air conditioning outlets as well. Run the heater and air conditioner blower on the lowest speed setting and

vacuum any powder expelled from the outlets.

CAUTION: Deployed front airbags having two initiators (squibs) in the airbag inflator may or may not have live pyrotechnic material
within the inflator. Do not dispose of these airbags unless you are certain of complete deployment. Refer to AIRBAG SQUIB STATUS.
All damaged, ineffective, or non-deployed Supplemental Restraint System (SRS) components which are replaced on vehicles are to be
handled and disposed of properly. If an airbag or seat belt tensioner unit is ineffective or damaged and non-deployed, refer to the
Hazardous Substance Control System for information regarding the potentially hazardous properties of the subject component and the
proper safe handling procedures. Then dispose of all non-deployed and deployed airbags and seat belt tensioners in a manner consistent
with state, provincial, local and federal regulations.

3. Next, remove the deployed SRS components from the vehicle. Refer to the appropriate service removal procedures.
4. You may need to vacuum the interior of the vehicle a second time to recover all of the powder.

Air Bag Systems > < Repairs and Inspections Required After a Collision|Service and Repair|Page 8438