Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Brake Fluid Level Sensor/Switch > Component Information > Service and Repair > Removal

Page 1
background image

Brake Fluid Level Sensor/Switch: Service and Repair
Removal

REMOVAL

1. Remove the wire connector from the fluid level sensor (2).

2. From the same side of the master cylinder reservoir (2) release the sensor locking taps with a small screw driver.
3. Pull the sensor (1) out of the reservoir (2) from the connector side of the sensor.

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Brake Fluid Level Sensor/Switch > Component Information > Service and Repair > Removal

[PREV PAGE] [NEXT PAGE]