Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Sensors and Switches > Sensors and Switches - Engine > Oil Pressure Sender > Component Information > Service and Repair > Engine Oil Pressure Sensor/Switch - Installation

Page 1
background image

Oil Pressure Sender: Service and Repair
Engine Oil Pressure Sensor/Switch - Installation

INSTALLATION

1. Install the oil pressure switch.
2. Connect oil pressure switch connector.
3. Install front splash shield.
4. Lower vehicle.
5. Connect the negative battery cable.
6. Start the engine and ensure there are no oil leaks from the oil pressure switch.

Sensors and Switches > Sensors and Switches - Engine > Oil Pressure Sender > Component Information > Service and Repair > Engine Oil Pressure Sensor/Switch - Installation

[PREV PAGE] [NEXT PAGE]