jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

A/T Governor - Delayed Upshift|Page 5893 > < A/T Governor - Delayed Upshift|Page 5891
Page 13
background image

GROUP: Body

DATE: Apr. 7, 1995

SUBJECT: 
Door Opening and Closing Efforts

MODELS:

1993 - 1995 (ZJ) Grand Cherokee/Grand Wagoneer

SYMPTOM/CONDITION:

Door opening or closing efforts are high due to improperly adjusted or damaged door latch mechanism.

DIAGNOSIS:

Figure 2, Latch And Striker

Inspect the door latch. See Figure 2 for proper alignment of the striker to the latch.

Inspect the latch for signs of damage to the plastic coating on the latch mechanism. If damage is present, replace the latch and perform the striker
adjustment procedure.

PARTS REQUIRED:

AR

55033438/9 Rt./Lt.

Latch - Front, with Power Locks

AR

55074804/5 Rt./Lt.

Latch - Rear, with Power Locks

AR

55033436/7 Rt./Lt.

Latch - Front, with Manual Locks

AR

5074806/7 Rt./Lt.

Latch - Rear, with Manual Locks

AR

04520289

Striker Shim - Gold - 3.75 mm

AR

55075483

Striker Shim - Silver - 2.50 mm

REPAIR PROCEDURE:

This bulletin involves inspecting the latch mechanism for damage and replacing the latch if necessary and adjusting the striker.

1.

Replace the latch if any damage is present.

Figure 1., Striker

2.

Slowly close the door until the striker loop contacts the latch (See Figure 1). Mark the location where the rearward side of the latch rachet contacts
the striker loop. Open the door and measure the clearance as shown in Figure 1. The clearance should be from 8 to 10 mm. (5/16 to 3/8 in.). If the
proper clearance is not attained shim adjustment is required. The chart in Figure 1 has been provided to show the thickness of the various shim
combinations.

NOTE

A/T Governor - Delayed Upshift|Page 5893 > < A/T Governor - Delayed Upshift|Page 5891