Grand Cherokee 2WD V8-318 5.2L VIN Y MFI (1994)
b. Install direct clutch reaction plate on clutch hub first. Note that one side of reaction plate is counterbored. Be sure this side faces rearward.
Splines at rear of hub are raised slightly. Counterbore in plate fits over raised splines. Plate should be flush with this end of hub.
c. Install first clutch disc followed by a steel plate until all discs and plates hake been installed.
d. Install pressure plate. This is last clutch pack item to be installed. Be sure plate is installed with shoulder side facing upward.