jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Removal and Replacement|Page 8466 > < Removal and Replacement|Page 8464
Page 7
background image

Removal.

6. Disengage the push-pin retainer (1) that secures the front console duct (2) to the gear selector (3).
7. Disconnect the front console duct from the air distribution housing (4) and remove the console duct.
8. Remove the screws (5) that secure the gear selector to the floor panel (6) and position the gear selector out of the way.

9. Disconnect the left rear floor duct (1) and the right rear floor duct (2) from the rear floor distribution duct (3).

10. Disconnect the rear floor distribution duct from the air distribution housing (4) and remove the distribution duct.
11. Disconnect the right front floor duct (5) and the left front floor duct (6) from the air distribution housing and remove the floor ducts.

12. Remove the nut (1) that secures the HVAC housing assembly (2) to the passenger side of the dash panel (3).

13. Disconnect the A/C liquid line and the A/C suction line from the A/C evaporatorSee: Hose/Line HVAC/Service and Repair/A/C Line - Removal.
14. Disconnect the heater hoses from the heater core tubes.
15. Remove the two bolts (1) that secure the HVAC housing assembly (2) to the engine compartment side of the dash panel (3).

Removal and Replacement|Page 8466 > < Removal and Replacement|Page 8464