Grand Cherokee 2WD V8-4.7L VIN J (2004)
Fig. 1
1. Open the trim plugs and remove the bolts. (Fig. 1)
2. Remove the a-pillar trim/grab handle from the a-pillar.
INSTALLATION
1. Align pin to attach hole of a-pillar.
2. Seat trim onto clips fully.
3. Install bolts. (Fig. 1)
4. Close trim plugs.
B-Pillar Lower Trim
B-PILLAR LOWER TRIM
REMOVAL
1. Remove front door sill trim.
2. Remove the front seat belt as necessary.
3. Un-clip forward leg of quarter panel trim from b-pillar lower rear edge. Un-clip remaining clips along quarter panel trim leg for easier access to
screws.