Grand Cherokee 2WD V8-4.7L VIN J (2004)
Fig.3 Accelerator Cable Release Tab - 4.7L V-8 Engine
5. Press tab to release plastic cable mount from bracket. Press on tab only enough to release cable from bracket. If tab is pressed too much, it will be
broken. Slide plastic mount towards passenger side of vehicle to remove cable from bracket.
6. Using finger pressure only, disconnect speed control cable connector at throttle body bellcrank pin by pushing connector off bellcrank pin towards
front of vehicle. DO NOT try to pull connector off perpendicular to the bellcrank pin. Connector will be broken.
Fig.4 Speed Control Cable At Bracket - 4.7L V-8 Engine