Grand Cherokee 2WD V8-4.7L VIN J (2004)
4. Connect both transmission cooler lines at the radiator.
5. Install both radiator mounting bolts.
6. Install air inlet duct at grill.
7. Attach electric connector for hydraulic fan control solenoid.
8. Install the grill. Refer to Body and Frame, Grille, Service and Repair See: Body and Frame/Grille/Service and Repair
9. Connect the two high pressure lines to the hydraulic fan drive. Tighten 1/2 inch pressure line fitting to 49 Nm (36 ft. lbs.) and the 3/8 inch
pressure line fitting to 29 Nm (21.5 ft. lbs.).
10. Connect the low pressure hose to the hydraulic fan drive. Position the spring clamp.
11. Connect the power steering filter hoses to the filter. Install new hose clamps. Refer tp Steering, Power Steering, Power Steering Line/Hose Service
and Repair See: Maintenance/Hoses/Power Steering Line/Hose/Service and Repair
12. Rotate the fan blades (by hand) and check for interference at fan shroud.
13. Refill cooling system. Refer to Cooling, Service and Repair See: Service and Repair
14. Refill the power steering reservoir and bleed air from system.
15. Connect battery cable at battery.
16. Start and warm engine. Check for leaks.