Grand Cherokee 2WD V8-4.7L VIN J (2004)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. Remove the right side headlamp mounting module and headlamp assembly Refer to Lamps/Lighting for the procedures.
2. Remove the two screws that secure the vacuum reservoir to the base of the radiator closure panel.
3. Remove the vacuum reservoir.
INSTALLATION
1. Install the vacuum reservoir in the vehicle and tighten the two screws to 3.4 Nm (30 in. lbs.).
2. Install the right side headlamp mounting module and headlamp assembly. Refer to Lamps/Lighting for the procedures.
