Grand Cherokee 2WD V8-4.7L VIN J (2004)
Crankshaft Position Sensor: Service and Repair
REMOVAL
CKP Sensor Location - 4.7L V-8 Engine
The Crankshaft Position (CKP) sensor is bolted to the side of the engine cylinder block above the starter motor. It is positioned into a machined hole at
the side of the engine block.
1. Remove starter motor. Refer to Starter Removal/Installation.
2. Disconnect CKP electrical connector at sensor.
CKP Sensor Removal/Installation - 4.7L V-8 Engine