jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Information Bus > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Locations|Page 3239

Grand Cherokee 2WD V8-4.7L VIN J (2004)

Page 2
background image

TPS Mounting Bolts - 4.7L Engine

3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.

INSTALLATION

1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air duct/air box to throttle body

Information Bus > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Locations|Page 3239