Grand Cherokee 2WD V8-4.7L VIN J (2004)
Canister Purge Solenoid: Service and Repair
Fig. 10 Evaporator Solenoid Location
REMOVAL
The duty cycle evaporative (EVAP) canister purge solenoid is located in the engine compartment near the brake master cylinder.
1. Disconnect electrical connector at solenoid.
2. Disconnect vacuum lines at solenoid.
3. Lift solenoid slot from mounting bracket for removal.
INSTALLATION
1. Position solenoid slot to mounting bracket.
2. Connect vacuum lines to solenoid. Be sure vacuum lines are firmly connected and not leaking or damaged. If leaking, a Diagnostic Trouble Code
(DTC) may be set with certain emission packages.
3. Connect electrical connector to solenoid.