jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Relays and Modules - Brakes and Traction Control > < Sunroof / Moonroof Module|Locations|Page 81
Page 1
background image

Sunroof / Moonroof Module: Service and Repair

CONTROL MODULE 

REMOVAL 

1. Move the glass panel to the fully closed position.
2. Remove the A-pillar trim. Refer to Trim Panel.
3. Remove the sun visors.
4. Remove the overhead console.
5. Lower headliner as necessary to gain access to the sunroof express module.
6. Disconnect the express module wire harness connectors.
7. Remove express module screw.
8. Remove express module from the keyway by sliding module towards the center of the vehicle.

INSTALLATION 

1. Insert sunroof express module in the keyway located in the sunroof module and slide the module outward to lock it into position.
2. Install the sunroof express module screw.
3. Connect the wire connectors to the sunroof express module.
4. Install the headliner into position.
5. Install the overhead console.
6. Install the sun visors.
7. Install the A-pillar trim.
8. Test sunroof operation, adjust if necessary.

Relays and Modules - Brakes and Traction Control > < Sunroof / Moonroof Module|Locations|Page 81