Grand Cherokee 2WD V8-4.7L VIN N (2000)
3. To remove caliper piston direct short bursts of low pressure air with a blow gun through the caliper brake hose port. Use only enough air pressure
to ease the piston out.
CAUTION: Do not blow the piston out of the bore with sustained air pressure. This could result in a cracked piston.
WARNING: NEVER ATTEMPT TO CATCH THE PISTON AS IT LEAVES THE BORE. THIS MAY RESULT IN PERSONAL
INJURY.
Caliper Piston Dust Boot Removal
4. Remove caliper piston dust boot with a suitable pry tool and discard.
Piston Seal Removal
5. Remove piston seal from the caliper and discard.
CAUTION: Do not scratch the piston bore while removing the seal.
Slide Pin And Bushing