Grand Cherokee 2WD V8-4.7L VIN N (2000)
ORIGINAL COLORS. PAINT MAY CHANGE THE WAY IN WHICH THE MATERIAL OF THE TOP COVER RESPONDS TO AN
AIRBAG DEPLOYMENT. FAILURE TO OBSERVE THIS WARNING COULD RESULT IN OCCUPANT INJURIES UPON AIRBAG
DEPLOYMENT.
1. Carefully position the passenger side airbag module onto the instrument panel structural duct.
2. Install and tighten the four screws that secure the passenger side airbag module to the instrument panel structural duct. Tighten the screws to 11.8
Nm (105 in. lbs.).
3. Reconnect the instrument panel wire harness connector to the passenger side airbag module wire harness connector, which is secured to the outside
of the outboard airbag module end bracket. Be certain that the airbag module wire harness connector is fully engaged and latched.
4. Install the top pad onto the instrument panel.
5. Do not reconnect the battery negative cable at this time.