Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Speaker: Service and Repair
Sound Bar
REMOVAL
Tweeter
1. Remove the sound bar from the vehicle. See Sound Bar for the procedures.
2. Unplug the sound bar wire harness connector from the tweeter.
Sound Bar Speaker Remove/Install
3. From the inside of the sound bar, use a pair of side cutters to cut and remove the push-nut type retainer that secures the tweeter to the sound bar.
4. From the inside of the sound bar, push the tweeter out of the mounting hole.
5. Reverse the removal procedures to install. Always use a new push-nut retainer to secure the tweeter in the sound bar.
Woofer
1. Remove the sound bar from the vehicle. See Sound Bar procedures.
2. Unplug the sound bar wire harness connector from the woofer.
3. From the inside of the sound bar, straighten the four tabs that secure the speaker grille to the sound bar.
4. From the outside of the sound bar, gently remove the speaker grille.
5. Carefully drill out the four rivets that secure the woofer to the sound bar.
6. Remove the woofer from the sound bar.
7. Reverse the removal procedures to install. Always use new rivets installed from the inside of the sound bar to secure the woofer.
