Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Glove Box Lock Cylinder
1. Remove the glove box latch and handle from the glove box. See Glove Box Latch and Handle procedures.
2. Insert the glove box key into the glove box lock cylinder.
Glove Box Lock Cylinder Remove/Install
3. Insert a small screwdriver into the retaining tumbler release slot and depress the retaining tumbler.
4. Pull the lock cylinder out of the latch handle by using a gentle twisting and pulling action on the key.
5. Reverse the removal procedures to install.
