Grand Cherokee 2WD V8-5.2L VIN Y (1998)
synchronized to the hour and minute settings of the radio clock. This is done by a message that the radio sends to the VIC module on the CCD data bus.
Also, the VIC module will automatically suppress the VIC hour and minute set functions if there is a Chrysler radio connected to the CCD data bus, and
the VIC clock must be set through the radio clock.
Reset Procedures - Vehicle Information Center (VIC)
VIC Reset
The flow chart describes the procedure to reset the Vehicle Information Center (VIC) service reminder or time/date settings. If the vehicle is equipped
with a Chrysler radio that is connected to the Chrysler Collision Detection (CCD) data bus network, the hour and minute settings of the VIC clock will
automatically be synchronized to the hour and minute settings of the radio clock. This is done by a message that the radio sends to the VIC module on
the CCD data bus. Also, the VIC module will automatically suppress the VIC hour and minute set functions if there is a Chrysler radio connected to the