Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Brake Light Bulb: Service and Repair
Tail, Stop, Turn Signal, Back-Up and Side Marker Lamp Bulbs
The stop, turn signal, back-up and rear side marker lamp bulbs are incorporated into the tail lamp.
REMOVAL
1. Remove tail lamp.
2. Grasp bulb socket and rotate counterclockwise. Separate socket from lamp.
Tail lamp Bulb
3. Pull bulb from socket.
INSTALLATION
1. Position bulb in socket and push into place.
2. Position bulb socket in lamp and rotate clockwise.
3. Install lamp.
