Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Fig. 79 PCM Mounting
5. Remove the three PCM mounting bolts (Fig. 79).
6. Remove PCM.
INSTALLATION
1. Check the pins in the three 32-way electrical connectors for damage. Repair as necessary.
2. Install PCM. Tighten three mounting bolts to 1 Nm (9 in. lbs.) torque.
3. Install three 32-way connectors.
4. Install cover over electrical connectors. Cover snaps onto PCM.
5. Install coolant reserve/overflow tank.
6. Connect negative cable to battery.