Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Carrier Bearings: Service and Repair
Front
REMOVAL
1. Remove differential case from axle housing.
Differential Bearing Removal
2. Remove the bearings from the differential case with Puller/Press C-293-PA, C-293-39 Adapter Blocks, and Plug SP-3289.
INSTALLATION
If replacement differential side bearings or differential case are being installed, differential side bearing shim requirements may change. Refer to the
Differential Bearing Preload and Gear Backlash procedures to determine the proper shim selection.
1. Install differential side bearing shims onto differential case hubs.
Differential Side Bearing Installation
2. Using Installer C-3716-A and Handle C-4171, install differential side bearings.
3. Install differential in axle housing.
