Grand Cherokee 2WD V8-5.7L (2010)
1. Remove the clevis bracket (3) from the shock (1)See: Front Clevis Bracket - Removal.
NOTE: On 4X4 vehicles install the C-4212F between the axle shaft and the lower control in order to allow the tool clearance to press the
bushing in and out.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
2. Press the bushing out using special tools C-4212F (Press) (1), 9653-1 (driver) (4) and 9653-2 (Receiver) (2) from the lower control arm (3).
Front Clevis Bracket Bushing - Installation
CLEVIS BRACKET BUSHING
NOTE: On 4X4 vehicles install the C-4212F between the axle shaft and the lower control in order to allow the tool clearance to press the