jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Washer Nozzle - Removal|Page 8041 > < Washer Nozzle - Removal
Page 2
background image

1. Disconnect and isolate the battery negative cable.
2. Remove the Center High-Mounted Stop Lamp (CHMSL) (1) from the liftgate outer panel. See: Lighting and Horns/Center Mounted Brake

Lamp/Service and Repair/Center Mounted Brake Lamp - Removal.

3. Disconnect the rear washer supply hose from the barbed nipple (3) on the back of the rear washer nozzle.
4. From the back of the CHMSL housing, depress the two integral latch features (2) of the nozzle, and push the nozzle out through the face of the

lamp lens.

Washer Nozzle - Removal|Page 8041 > < Washer Nozzle - Removal