Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
(1) Remove screw attaching trim panel to inside release handle (Fig. 27).
(2) Remove screw at armrest.
(3) Using trim remover (C-4829 or equivalent), detach trim panel perimeter push-in fasteners from door inner panel.
(4) If equipped, disconnect the wiring connectors from power switch pan~.
(5) Lift trim panel over inside release handle and remove trim panel from door.
NSTALLATION
(1) If equipped, conn9ct the wiring connectors to power switch panel.
(2) Position trim panel on door inner panel
(3) Press push-in fasteners inward around perime ter of door to attach it to inner panel.
(4) Install armrest screw.
(5) Install mirror bezel screw.
(6) Install screw attaching trim panel to inside release handle.