Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
17.
Install the HVAC fan motor and attaching screws (1-20 torx). Tighten screws to 2.2 Nm (22 in. lbs.).
18.
Connect the HVAC fan motor electrical connector to the wire harness.
19.
Install the glove box and hush panel below the glove box.
20.
Connect the negative battery cable to the battery.
21.
Verify that the HVAC fan motor and fresh air inlet door operate correctly. Verify that the fan motor sound level has been corrected. Set the clock
to the correct time.
22.
Install the plastic air inlet baffle to the cowl trough.
23.
Install the plastic cowl/plenum cover.
24.
Install the hood-to-plenum weatherstrip.
25.
Lower vehicle hood.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.