Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
9. Carefully install the heater core (3) into the passenger side of the air distribution housing (2).
10. If equipped with dual zone heating-A/C, install the blend door stop (1) onto the passenger side of the air distribution housing.
11. Position the rear floor/console door actuator (2) onto the passenger side of the air distribution housing (3). If necessary, rotate the actuator slightly
to align the splines on the actuator output shaft with those on the floor/console door pivot shaft.
12. Install the screws (1) that secure the rear floor/ console door actuator onto the passenger side of the air distribution housing. Tighten the screws to
2 N.m (17 in. lbs.).
13. If equipped with dual zone heating-A/C, position the blend door actuator mounting bracket (5) onto the passenger side of the air distribution
housing and install the retaining screws (4). Tighten the screws to 2 N.m (17 in. lbs.).
14. If equipped with dual zone heating-A/C, position the blend door actuator (7) onto the blend door actuator mounting bracket and install the
retaining screws (6). Tighten the screws to 2 N.m (17 in. lbs.). If necessary, rotate the actuator slightly to align the splines on the actuator output
shaft with those on the blend door stop.
