Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Ambient Light Sensor: Service and Repair
Auto Headlamp Sensor
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the auto headlamp sensor and lift it out of the instrument panel top pad.
3. Disconnect the harness connector from the auto headlamp sensor.
4. Separate the auto headlamp sensor from instrument panel.
INSTALLATION
1. Connect the harness connector to auto headlamp sensor.
2. Position the auto headlamp sensor on instrument panel and firmly snap onto place.
3. Connect the battery negative cable.