jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Pressure Line - Pump to Gear|Page 5244 > < Pressure Line - Pump to Gear
Page 2
background image

1. Install the line (2) to the vehicle.
2. Reconnect the power steering pressure line (2) to the power steering gear (1) Tighten to 28 Nm (21 ft. lbs.).

3. Install the oil filter drain (1) and tighten the 3 bolts (2).
4. Install the front splash shield.
5. Lower the vehicle.
6. Reconnect the power steering pressure line to the power steering pump Tighten to 28 Nm (21 ft. lbs.).
7. Install the air cleaner assembly.
8. Refill the power steering fluid and bleed the system.

Pressure Line - Pump to Gear|Page 5244 > < Pressure Line - Pump to Gear