Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
3. Install the wheel speed sensor wire to the upper control arm (5).
4. Install the upper ball joint (2) into the knuckle (3).
5. Install the upper ball joint retaining nut (4) and tighten the nut to 81 Nm (60 ft. lbs.).
6. Install the inner fender well (2).
7. Install the tire and wheel.
8. Remove the supports and lower the vehicle.
9. Perform a wheel alignment.
Clevis Bracket
CLEVIS BRACKET
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire.
3. Remove the two brake caliper adapter bolts (3).
