Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
3. Position the lower suspension arm (3) in the axle bracket.
4. Install the axle bracket bolt (1) and nut (2) Tighten to 210 Nm (155 ft. lbs.).
5. Remove the supports and lower the vehicle.
Upper Control Arm
UPPER CONTROL ARM
REMOVAL
LEFT SIDE
1. Raise and support the vehicle.
2. Support the rear axle.
3. Lower the fuel tank in order to gain access to the bolt.
4. Remove the upper suspension arm nut (2) and bolt (3) from the axle bracket.
5. Remove the nut (1) and bolt (5) from the frame rail and remove the upper suspension arm (2).
RIGHT SIDE
1. Raise and support the vehicle.
2. Support the rear axle.
