jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Front Cross-Member|Service and Repair|Page 5381 > < Front Cross-Member|Service and Repair|Page 5379
Page 9
background image

4. Tighten the front differential front bolts to 54 N.m (40 ft.lbs.). 

5. Install the propeller shaft as necessary.
6. Install the right half shaft onto the differential.
7. Connect the electrical connector (1) (if equipped) and the vent hose (2).

Front Cross-Member|Service and Repair|Page 5381 > < Front Cross-Member|Service and Repair|Page 5379