Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Seals and Gaskets: Service and Repair
545RFE Automatic Transmission
Seal-Adapter Housing
SEAL-ADAPTER HOUSING
REMOVAL
1. Remove the transfer case from the transmission.
2. Using a screw mounted on a slide hammer, remove the adapter housing seal.
INSTALLATION
1. Clean the adapter seal bore in the adapter housing of any residue or particles remaining from the original seal.
2. Install new oil seal in the adapter housing using Seal Installer C-3860-A (1). A properly installed seal is flush to the face of the seal bore.
3. Install the transfer case onto the transmission.
Seal-Oil Pump Front
SEAL-OIL PUMP FRONT
REMOVAL
1. Remove transmission from the vehicle.
2. Remove the torque converter from the transmission.
3. Using a screw mounted in a slide hammer, remove the oil pump front seal.
INSTALLATION
1. Clean seal bore of the oil pump of any residue or particles from the original seal.
