Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
4. Remove propeller shaft (1) from vehicle transfer case flange (2) or transmission flange (3).
5. Remove propeller shaft from vehicle.
INSTALLATION
NOTE: Inspect propeller shaft boot for damage and replace if necessary.
NOTE: Clean all propeller shaft bolts and apply Mopar Lock & Seal Adhesive or Loctite 242 to the threads before installation.
1. Install propeller shaft (1) with all reference marks aligned.
2. Install shaft (1) on transfer case (2) or transmission (3) with reference marks aligned and tighten flange bolts to 108 Nm (80 ft. lbs.).
3. Install axle pinion flange (2) bolts and tighten to 108 Nm (80 ft. lbs.).
