Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
5.
Verify that the window regulator assembly is properly attached to the inner door panel. Tighten the five (5) attaching bolts to 8.8 Nm (75 in. lbs.)
(Fig. 3).
6.
Verify that the window glass run channel is properly attached to the inner door panel. Tighten the upper nut and the lower screw to 10 Nm (90 in.
lbs.) (Fig. 4).
7.
Verify that the glass run channel weatherstrip is fully seated to the glass run channel. Adjust as required.
8.
Verify that the window opening weatherstrip is fully seated around the entire window opening and at the bottom of the door pillar.