Grand Cherokee 2WD Limited V8-4.7L (2002)
INSTALLATION
1. Position the compact disc changer onto the four studs.
2. Install the four mounting nuts. Tighten the nuts to 12 Nm (105 in. lbs.).
3. Reconnect the right body wire harness connector.
4. Position the compact disc changer storage bin onto the right side quarter trim panel.
5. Using both hands push the compact disc changer storage bin firmly and evenly toward the right side quarter trim panel far enough to engage the
hooks on the bin with the slots in the panel.
6. Using both hands push the compact disc changer storage bin firmly and evenly downward far enough to align the screw holes in the bin with the
mounting holes in the right side quarter trim panel.
7. Install the two screws that secure the top of the compact disc changer storage bin. Tighten the screws to 1.7 Nm (15 in. lbs.).
8. Reconnect the battery negative cable.
