Grand Cherokee 2WD Limited V8-4.7L (2002)
Trunk / Liftgate Weatherstrip: Service and Repair
LIFTGATE OPENING WEATHERSTRIP
REMOVAL
1. Remove the liftgate scuff plate trim. Refer to Trim Panel.
2. Pull seal away from flange around edge of lift-gate opening.
Fig. 10
3. Separate weatherstrip from opening (Fig. 10).
4. Clean weatherstrip flange as necessary.
INSTALLATION
1. Position weatherstrip in opening with left end of seal at opening centerline.
2. Press weatherstrip onto flange in a clockwise direction.
3. Center and butt weatherstrip ends together at centerline.
4. Install the liftgate scuff plate trim. Refer to Trim Panel.
