Grand Cherokee 2WD Limited V8-4.7L (2002)
Housing Assembly HVAC: Overhaul
DISASSEMBLY
1. Remove the HVAC housing from the vehicle. See: Removal and Replacement
2. Place the HVAC housing with the tubing side down on a work bench, making allowance for leakage of fluids.
Fig.12 Split Foam Seal At Panel Outlet
3. Using a sharp knife, split the foam seal surrounding the panel outlet opening, at the dividing line of the upper and lower cases.
4. Place the HVAC housing in the upright position on the work bench.
Fig.13 Mode Door Actuators - Manual System