jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3602 > < Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3600
Page 11
background image

10.

Remove the four (4) fuel tank-to-rear bumper fascia clips (Figure 9).

11.

Remove the two (2) rear brush guard/skid plate-to-frame support brackets (Figure 10).

12.

Disconnect the fuel pump electrical connector (Figure 11).

13.

Remove the brush guard/skid plate-to-frame bracket at the front of the fuel tank (Figure 11).

Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3602 > < Recall - EVAP Canister Vent Hose & Filler Check Valve|Page 3600