Grand Cherokee 2WD Limited V8-4.7L (2002)
Child Seat Tether Attachment: Description and Operation
Fig.10 Child Tether Anchors - North America
Fig.11 Child Tether Anchors - Rest-Of-World
CHILD TETHER ANCHOR
All vehicles are equipped with fixed-position, child seat tether anchors. Vehicles manufactured for sale in North America have two stamped steel
child tether anchor brackets, one secured with a screw to each outboard end of the inner liftgate opening header at the rear of the passenger
compartment. These child tether anchors are concealed behind a removable molded plastic cap that snaps into a bezel located in the headliner over
each anchor bracket position. Vehicles manufactured for sale in Rest-Of-World (ROW) markets have two anchors that are integral to the back of
the right rear seat back panel, and one that is integral to the left rear seat back panel. The North American child seat tether anchor brackets are
available for separate service replacement. The ROW child seat tether anchors cannot be adjusted or repaired and, if faulty or damaged, they must
be replaced as a unit with the rear seat back panel.
See the owner's manual in the vehicle glove box for more information on the proper use of the factory-installed child seat tether anchors.
