Grand Cherokee 2WD Limited V8-4.7L (2002)
Power Interrupt Connector/Switch: Service and Repair
IOD FUSE
REMOVAL
The Ignition-OFF Draw (IOD) fuses normal installation location is cavity 15 in the power distribution center. When the vehicle is shipped from the
assembly plant the fuse is removed to maintain proper battery voltage during vehicle storage (in some cases). Dealer personnel must install the IOD
fuse when the vehicle is being prepared for customer delivery in order to restore full electrical system operation.
1. Turn the ignition switch to the OFF position.
2. Unlatch and open the cover of the power distribution center.
Fig.2 Ignition-Off Draw Fuse
3. Remove the IOD fuse from fuse cavity 15 of the power distribution center (Fig. 2).
4. Store the removed IOD fuse by installing it in the unused fuse storage cavity 11 of the PDC (Fig. 2).
5. Close and latch the power distribution center cover.
INSTALLATION
1. Be certain the ignition switch is in the OFF position.
2. Unlatch and open the cover of the power distribution center.
3. Remove the stored IOD fuse from fuse storage cavity 11 of the power distribution center.
4. Use a thumb to press the IOD fuse firmly down into power distribution center fuse cavity 15.
5. Close and latch the power distribution center cover.
