Grand Cherokee 4WD V6-3.0L DSL Turbo VIN M (2007)
3. Cut the O-ring and press the clip the rest of the way into the actuator arm. Make sure the clip clicks into place.
4. Install the swirl valve actuator. Tighten the bolts to 8 Nm (44 lbs. in.).
5. Connect the swirl valve connector.
6. Position and connect the engine harness.
CAUTION: Observe the position of the turbocharger oil passage housing and gasket. Failure to properly position the gasket during
assembly will result in immediate turbocharger failure after assembly.
7. Install the turbocharger.