Grand Cherokee 4WD V6-3.0L DSL Turbo VIN M (2007)
![background image](/jeep/grand_cherokee_4wd/v6-3.0l_dsl_turbo_vin_m/Page-1014001.png)
Front Crankshaft Seal: Service and Repair
Removal
REMOVAL
1. Disconnect negative battery cable.
2. Raise and support the vehicle.
3. Remove both front lower splash shields.
4. Remove the transmission thermal bypass valve and the cooler lines between the block and transmission.
5. Remove the starter blank.
6. Install # 9102 flywheel locking tool.