jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Headlamp Leveling Module - Description|Page 221 > < Front Fog Lamp Relay - Description|Page 216
Page 1
background image

Headlamp Alignment Control Module: Description and Operation
Headlamp Leveling Module - Description

DESCRIPTION

An Automatic Headlamp Leveling Module (AHLM) (1) is standard equipment with the optional High Intensity Discharge (HID) headlamps. The AHLM
is located on the bottom of the right front lamp unit housing, but serves both the right and left front lamp units. This module works in conjunction with
the front and rear axle sensors and the headlamp leveling motors to provide automatic headlamp beam adjustment to compensate for changes in vehicle
height cased by changes in vehicle loading, acceleration or deceleration.

The molded black plastic AHLM housing has integral mounting flanges (4) that are secured by a stamped aluminum cover plate and four screws to a
receptacle in the bottom of the right front lamp unit housing. Concealed within the housing is the circuitry of the module, which includes a
microprocessor. The module is connected through an integral connector receptacle (2) to the vehicle electrical system by a take out and connector of the
right front lamp unit wire harness.

The AHLM cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.

Headlamp Leveling Module - Description|Page 221 > < Front Fog Lamp Relay - Description|Page 216